About Us
Facts
Quality Policy
Environmental Policy
Conveyor Systems
Handling Solutions
MODU at Work
Slat Chain & Components
Services 
Downloads
Gallery
Email Us
Job vacancies
 |
 |
 |
 |
| MS2 (63mm) | MM3 (83mm) | ML2 (140mm) | MX2 (220mm) |
- Home
- Introduction About MODU
- Industrial Services Industrial Automation
- Media downloads
- Inquiry reach us
225mm Wide Safety Chain Conveyor System
MODU System’s new MX2 conveyor product offers ground breaking solutions to today’s heavy duty manufacturing challenges. Our MX2 conveyor platform greatly improves performance standards for what a heavy duty conveyor system can accomplish.
With product width capacity of up to 500mm (20”), greater strength and higher available chain speed our MX2 conveyor will exceed your manufacturing demands.
Technology that puts the Environment First!
We work hard to keep our product pollution to the minimum by using the following guidelines: reduce, reuse and recycle. MODU uses materials such as aluminium, POM, ABS, etc that are fully recyclable. Most of our parts are systematically coded to facilitate recovery & recycling..
Industrial Conveyor & Automation
The conventional conveyor system is normally the belt & roller which is difficult to install & dismantle, expensive to build, maintain and cannot be reconfigured. MODU Conveyors are Modular, Flexible and are more cost effective over long the life of the system.
Restaurant Conveyor & Equipment
MODU is committed to being the preferred provider of conveyors for Kaiten Sushi restaurant, Shabu Shabu restaurant, Tapas Cuisine, Lebanese Cuisine, display shops, related products and services internationally.
System condition Evaluation
By means of a MODU System Scheduled inspection, analysis of the current condition of the system, determines the level of service and maintenance needed to ensure high performance and reliability.
Gripper Conveyor System
Gripper is used for elevating, lowerating or providing buffer capacity at the end of a conveyor run, or between different conveyors. It consist 2 set of conveyors installed side by side within one support structure to conveyor product to a different or same output height with minimum space consumption. It grips the product firmly but gentle enough thru its course before discharging the product to another conveyor.
Advantages of gripper conveyors
- Saving floor space, transportation length and require less transfer.
- Maximize space utilization by creating cooling buffer at ceiling level.Integrate able with other application such as blower and ink printing device.
- Flexible to install and match with site arrangement layout.
Types of Gripper Conveyor
There are four main types of gripper conveyor available to suit your industrial application.
 |
 |
 |
 |
| C-Flow | S-Flow | Simple Gripper Upender | Gripper Upender |
What MODU Gripper Conveyor can do?
|
|
1. Product Elevation Picks up items from an infeed conveyor, carries them (90º vertical) up or down to a higher or lower elevation, and delivers them to a discharge conveyor. Drives are always placed at the discharge end. This type of conveyor can be used for buffering, filling, blowing, palletizing, packing and etc. |
|
Gripper upender design changes the product orientation by 90º. It picks up items from an infeed conveyor, carries product up or down to a higher or lower elevation, and delivers them to a discharge conveyor. Drive units are placed at the discharge end |
|
|
A simple depucking system could be achieve by fixing a short gripper conveyor above plain chain conveyor. Filled bottles are remove from it puck when entering gripper conveyor and transfer to another conveyor for capping process while the puck is return back to the starting to be filled with fresh empty bottles. |
|
|
Picks up items from an infeed conveyor, changes product orientation up side down, and delivers them to a discharge conveyor. Drives are always placed at the discharge end. This type of conveyor is used for cleaning, drying before entering filling machine or printing purposes. |
|
|
Picks up items from a horizontal infeed conveyor, brings product above head clearance at a short distance, then declines and levels out to deliver them to a horizontal discharge conveyor, permitting operator or forklift access from one side to other. |
|
|
Picks up product from a horizontal infeed conveyor, inverts them 180º, passes them over an air rinsing or air rinsing/ionizing section (or other type of customer specified process equipment), inverts them 180º back to their original orientation, and delivers them onto a horizontal discharge conveyor. |
Products
DS2 (63mm) DM3 (83mm) DL2 (140mm) 
C-Flow S-Flow Simple L-Flow R-Flow 
The alpine conveyor system consists of multiple layers of conveyors that are stacked above each other. It is used for buffer processes, storage tower or as an accumulation and incline or decline to or from overhead transport system.
Copyright 2011 MODU System